Metal Front Bumper Grilles

£26.00 ex VAT

MADE TO ORDERHANDMADE AND TYPICALLY SHIPPED WITHIN 1-2 WEEKS

What others have to say about this:

  Designed for Issue 2 of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya.

Installation instructions

  1. Identify the Left and Right grilles, by the ‘L‘ and ‘R‘ letters marked on each piece
  2. Peel off the self-adhesive backing on each grille and gently position each grille into place
  3. Do not install the green pedestrian scanner on the left side – this never featured on the original car
  4. Take a spare AM screw from Issue 2 (you should have 2 spare), one for each side and use to loosely fix the grilles into place
  5. Check the grilles from the front and once you’re happy with the alignment, press the self-adhesive area down into place and tighten the AM screws
  6. Fix the fog lights into place behind the grilles. Note: Be careful not to over-tighten and check for any resistance against the grilles.

Made from metal and super easy to install, these front bumper grilles fit discreetly behind the openings in the bumper and have been designed to match KITT to the Season 1/2 nose design.

Hand-crafted and painted in gloss black, the grilles are held in place with a single AM screw on each side (using spares provided with the model) and small self-adhesive tabs.

The paint and finish have been carefully matched to the model and the design of the grilles matched to the original as closely as possible.

Features

  • Quick and easy-to-install
  • Made from solid metal
  • Pre-painted, matching the models black glossy finish
  • Accurately angled grille louvres with depth
  • Screen-accurate to Knight Rider Season 1/2 K.I.T.T
  • No glue required
  • High quality finish and construction

Grilles, or no grilles?

KITT’s front bumper changes appearance slightly through each Knight Rider season – however, the front nose with the grilles covering the fog lights in Season 1 and 2 is undoubtedly the most iconic look we all know and love.

Throughout Season 2, KITT slowly transitioned from having these fog light grilles to not.

The green pedestrian scanner

The green scanner behind the left side of the grille should be removed from the model as it was never present on KITT. A reference car used for the creation of the model had this present but it isn’t accurate to the TV show. If you do still want to include this part, you will need to use a GM screw to affix this behind my grilles. Otherwise, a standard AM screw is all it takes to install my grilles.

What’s included:

  • 2 x Pre-painted metal front bumper grilles (1 x Left grille and 1 x Right grille)
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

  Designed for Issue 2 of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya.

Installation instructions

  1. Identify the Left and Right grilles, by the ‘L‘ and ‘R‘ letters marked on each piece
  2. Peel off the self-adhesive backing on each grille and gently position each grille into place
  3. Do not install the green pedestrian scanner on the left side – this never featured on the original car
  4. Take a spare AM screw from Issue 2 (you should have 2 spare), one for each side and use to loosely fix the grilles into place
  5. Check the grilles from the front and once you’re happy with the alignment, press the self-adhesive area down into place and tighten the AM screws
  6. Fix the fog lights into place behind the grilles. Note: Be careful not to over-tighten and check for any resistance against the grilles.

Made from metal and super easy to install, these front bumper grilles fit discreetly behind the openings in the bumper and have been designed to match KITT to the Season 1/2 nose design.

Hand-crafted and painted in gloss black, the grilles are held in place with a single AM screw on each side (using spares provided with the model) and small self-adhesive tabs.

The paint and finish have been carefully matched to the model and the design of the grilles matched to the original as closely as possible.

Features

  • Quick and easy-to-install
  • Made from solid metal
  • Pre-painted, matching the models black glossy finish
  • Accurately angled grille louvres with depth
  • Screen-accurate to Knight Rider Season 1/2 K.I.T.T
  • No glue required
  • High quality finish and construction

Grilles, or no grilles?

KITT’s front bumper changes appearance slightly through each Knight Rider season – however, the front nose with the grilles covering the fog lights in Season 1 and 2 is undoubtedly the most iconic look we all know and love.

Throughout Season 2, KITT slowly transitioned from having these fog light grilles to not.

The green pedestrian scanner

The green scanner behind the left side of the grille should be removed from the model as it was never present on KITT. A reference car used for the creation of the model had this present but it isn’t accurate to the TV show. If you do still want to include this part, you will need to use a GM screw to affix this behind my grilles. Otherwise, a standard AM screw is all it takes to install my grilles.

What’s included:

  • 2 x Pre-painted metal front bumper grilles (1 x Left grille and 1 x Right grille)
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

Video reviews

Reviews (10)

Add a review
  1. Rated 5 out of 5

    Mike Lotkowski (verified owner)

    Excellent addition to the model! Helps it look more closely to actual car.

  2. Rated 5 out of 5

    Dino (verified owner)

    Metal front bumper grilles the are excellent, they complete the car.

  3. Rated 5 out of 5

    Paul (verified owner)

    Another fantastic Mike Lane mod! These small parts make such a huge difference to the look of the bumper, once you put them in it seems like an oversight by Deagostini to have left them out in the first place. Highly recommended.

  4. Rated 5 out of 5

    John Smerdon (verified owner)

    I’ve started to build but add the mods as I do each separate kit from 1 upwards. It’s so much better than having to un assemble to fit. But Mikes instructions are easy to follow.
    Just be patient and don’t rush it.
    Thanks Mike Brilliant mods u k build

  5. Rated 5 out of 5

    Jens Roth (verified owner)

    Looks so good in the bumper! Great Job!

  6. Rated 5 out of 5

    Tony Dicker (verified owner)

    Brilliant, having the grilles installed makes the bumper stand out a lot more.

  7. Rated 5 out of 5

    Cyrille Aupiais (verified owner)

    Great quality, really easy to assemble !
    Thank you very much Mike !

  8. Rated 5 out of 5

    Mike Harrington (verified owner)

    Amazing quality and literally 10 minutes to install, if that! Total improvement on the original, seamlessly working with the existing set up.

  9. Rated 5 out of 5

    Brian Dubin (verified owner)

    These look absolutely incredible. They really add to the front of the car and were simple to install. Another amazing mod from Mike. Looking forward to future mods for KITT!

  10. Rated 5 out of 5

    Stefan (verified owner)

    Perfect! Very good quality, easy to install and it gives the front a so much better look!