Metal Rear Door Vent

£15.00 ex VAT

MADE TO ORDERHANDMADE AND TYPICALLY SHIPPED WITHIN 1-2 WEEKS

  Designed for Stage 103 of the Build the Ghostbusters Ecto-1 by Eaglemoss. View build planner

Installation instructions

Please refer to the step-by-step photos here on this page for additional guidance.

  1. Remove the existing vent if already installed.
  2. Carefully bend the new metal vent into shape – matching the profile of the rear door as closely as possible prior to fitting.
  3. Check the photos here on this page for correct orientation and direction of the vent louvres.
  4. Remove the protective backing from the 3M self-adhesive and stick into position – the adhesive will strengthen over time to ensure a long-lasting hold.

Made from solid metal, this replacement vent for the rear door of the Hero Collector Ghostbusters Ecto-1 has a much lower profile and closely matches that of the original car.

Redesigned to correct the scale and number of vent louvres, whilst also adding additional, accurate detailing such as the rivets surrounding the vent.

At only 0.3mm thick, the vent is super low-profile matching that of the real vents on the Ecto-1.

The vent is self-adhesive and easy to install – finished to a high level of detail.

Features include:

  • Made from metal – More realistic, accurate and authentic to the original Ecto-1
  • Lower profile – At only 0.3mm thick, this vent is significantly thinner than the standard Eaglemoss part, making it more accurate and realistic
  • Correct number of louvres/grilles – Carefully scaled and matched, including the correct number of louvres on the vent
  • Self-adhesive – Easy to install, the vent has a high quality permanent 3M self-adhesive backing to last the test of time
  • Added rivets – Matching the exact positions on the real car

What’s included:

  • 1 x Self-adhesive rear door vent
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.
  Designed for Stage 103 of the Build the Ghostbusters Ecto-1 by Eaglemoss. View build planner

Installation instructions

Please refer to the step-by-step photos here on this page for additional guidance.

  1. Remove the existing vent if already installed.
  2. Carefully bend the new metal vent into shape – matching the profile of the rear door as closely as possible prior to fitting.
  3. Check the photos here on this page for correct orientation and direction of the vent louvres.
  4. Remove the protective backing from the 3M self-adhesive and stick into position – the adhesive will strengthen over time to ensure a long-lasting hold.

Made from solid metal, this replacement vent for the rear door of the Hero Collector Ghostbusters Ecto-1 has a much lower profile and closely matches that of the original car.

Redesigned to correct the scale and number of vent louvres, whilst also adding additional, accurate detailing such as the rivets surrounding the vent.

At only 0.3mm thick, the vent is super low-profile matching that of the real vents on the Ecto-1.

The vent is self-adhesive and easy to install – finished to a high level of detail.

Features include:

  • Made from metal – More realistic, accurate and authentic to the original Ecto-1
  • Lower profile – At only 0.3mm thick, this vent is significantly thinner than the standard Eaglemoss part, making it more accurate and realistic
  • Correct number of louvres/grilles – Carefully scaled and matched, including the correct number of louvres on the vent
  • Self-adhesive – Easy to install, the vent has a high quality permanent 3M self-adhesive backing to last the test of time
  • Added rivets – Matching the exact positions on the real car

What’s included:

  • 1 x Self-adhesive rear door vent
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

Reviews (1)

Add a review

Your email address will not be published.

  1. Rated 5 out of 5

    Dave p

    Another highly detailed mod by Mike Lane thats vastly superior in looks and detail to the supplied one makes the Ecto 1 shine even more.