Model Tyre Dressing
£6.00 ex VAT
In stock
Suitable for all scale models, this quick-drying soft sheen tyre dressing gives your tyre walls the perfect showroom finish.
The tyre dressing enhances dull rubber tyres, leaving a smooth finish without looking too glossy or plasticky.
UV and crack resistant, the tyre dressing is also safe to use with my rub-on tyre transfer kits, doubling as a protective seal to help prevent rubbing, drying or cracking of the transfers over time.
The tyre dressing is water-based, non-toxic and easy to apply.
The dressing requires no buffing, simply apply 1-2 coats and leave to dry for the perfect finish.
The kit includes a special short handled application brush with a wide brush head, allowing for long continuous strokes around the tyre wall. This helps to give a uniform, streak-free finish to your tyres.
What’s included:
- 1 x 5ml bottle of soft sheen tyre dressing (plenty enough for use across several models)
- 1 x Application brush
Application instructions
Before you start:
- The dressing is quick-drying, so avoid brushing over the same area too many times whilst applying.
- Ensure the tyre wall is clean, dust-free and dry before application.
- Apply in long complete strokes using the brush provided. If possible, turning the wheel whilst keeping the brush stationary is the easiest method and gives the bets results.
- Avoid any build-up and try to ensure a thin even coat across the tyre wall.
Application:
- Apply 2-3 drops to the brush head and apply 1-2 thin coats across the tyre wall (ideally leaving 1hr between coats).
- The dressing will dry clear, with a natural soft sheen finish. It requires no buffing.
- Wash the brush throughly with warm water between coats and after use and keep in a safe place for future use.
- Leave the tyres to dry fully (ideally overnight) before handling too much.
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.
Suitable for all scale models, this quick-drying soft sheen tyre dressing gives your tyre walls the perfect showroom finish.
The tyre dressing enhances dull rubber tyres, leaving a smooth finish without looking too glossy or plasticky.
UV and crack resistant, the tyre dressing is also safe to use with my rub-on tyre transfer kits, doubling as a protective seal to help prevent rubbing, drying or cracking of the transfers over time.
The tyre dressing is water-based, non-toxic and easy to apply.
The dressing requires no buffing, simply apply 1-2 coats and leave to dry for the perfect finish.
The kit includes a special short handled application brush with a wide brush head, allowing for long continuous strokes around the tyre wall. This helps to give a uniform, streak-free finish to your tyres.
What’s included:
- 1 x 5ml bottle of soft sheen tyre dressing (plenty enough for use across several models)
- 1 x Application brush
Application instructions
Before you start:
- The dressing is quick-drying, so avoid brushing over the same area too many times whilst applying.
- Ensure the tyre wall is clean, dust-free and dry before application.
- Apply in long complete strokes using the brush provided. If possible, turning the wheel whilst keeping the brush stationary is the easiest method and gives the bets results.
- Avoid any build-up and try to ensure a thin even coat across the tyre wall.
Application:
- Apply 2-3 drops to the brush head and apply 1-2 thin coats across the tyre wall (ideally leaving 1hr between coats).
- The dressing will dry clear, with a natural soft sheen finish. It requires no buffing.
- Wash the brush throughly with warm water between coats and after use and keep in a safe place for future use.
- Leave the tyres to dry fully (ideally overnight) before handling too much.
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.
torchwood1 (verified owner) –
very cool like it