Carpets

£24.00£26.00 ex VAT

Clear

What others have to say about this:

  Designed for Stages 58, 66, 67, 69 and 70 of the Build the 1961 Jaguar E-Type by Agora.

Installation instructions

Please refer to the step-by-step photos here on this page for additional installation guidance.

  1. Ensure that all sections requiring carpet (from stages 58, 66, 67, 69 and 70) are disassembled and completely removed from the model before you start.
  2. For best results, install the carpet sections in the order specified on the installation diagram provided, also indicated in the step-by-step photos here on this page.
  3. Each piece is self-adhesive – simply peel off the backing and begin sticking into place.
  4. Lay each piece slowly to check for alignment – using your fingers to apply and push out any potentially trapped air bubbles from beneath the carpet as you go.
  5. The provided spudger tool is handy for pressing the carpets into difficult to reach areas and corners, but be mindful not to drag the tool along the main carpet surfaces as you risk damaging or tearing it. Only use your fingers for pressing the carpets into their final position.
  6. The adhesive will strengthen within just a few hours of contact, so if you need to peel and reposition the carpets, ensure you act quickly during installation.

This stunning scale carpet set is designed to upgrade the interior of your 1:8 1961 Jaguar E-Type – making it look and feel significantly more authentic.

Self-adhesive and easy to install, the carpets are pre-cut and designed to fit your Jaguar E-Type model perfectly. This comprehensive 11-piece carpet set has been expertly crafted to enhance the interior of your build-up model – helping to make it look even more authentic to the original Jaguar E-Type.

Made from a unique, custom material, the carpets are easy to install and accurate in colour, with a realistic look and feel to them. Once installed, this modification will give your model a much higher-quality, premium finish.

Available in four colours – Tan Brown, Cream Beige, Burgundy (Limited Edition) and Black.

Features

  • Self-adhesive and easy to install
  • Hides the nasty plastic finish of the interior flooring
  • Completely transforms and enhances the interior of your model
  • Realistic look and feel
  • Professionally and accurately cut

What’s included:

  • 1 x Set of self-adhesive carpets (11 pieces in total)
  • 1 x Spudger tool
  • 1 x Installation diagram
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

  Designed for Stages 58, 66, 67, 69 and 70 of the Build the 1961 Jaguar E-Type by Agora.

Installation instructions

Please refer to the step-by-step photos here on this page for additional installation guidance.

  1. Ensure that all sections requiring carpet (from stages 58, 66, 67, 69 and 70) are disassembled and completely removed from the model before you start.
  2. For best results, install the carpet sections in the order specified on the installation diagram provided, also indicated in the step-by-step photos here on this page.
  3. Each piece is self-adhesive – simply peel off the backing and begin sticking into place.
  4. Lay each piece slowly to check for alignment – using your fingers to apply and push out any potentially trapped air bubbles from beneath the carpet as you go.
  5. The provided spudger tool is handy for pressing the carpets into difficult to reach areas and corners, but be mindful not to drag the tool along the main carpet surfaces as you risk damaging or tearing it. Only use your fingers for pressing the carpets into their final position.
  6. The adhesive will strengthen within just a few hours of contact, so if you need to peel and reposition the carpets, ensure you act quickly during installation.

This stunning scale carpet set is designed to upgrade the interior of your 1:8 1961 Jaguar E-Type – making it look and feel significantly more authentic.

Self-adhesive and easy to install, the carpets are pre-cut and designed to fit your Jaguar E-Type model perfectly. This comprehensive 11-piece carpet set has been expertly crafted to enhance the interior of your build-up model – helping to make it look even more authentic to the original Jaguar E-Type.

Made from a unique, custom material, the carpets are easy to install and accurate in colour, with a realistic look and feel to them. Once installed, this modification will give your model a much higher-quality, premium finish.

Available in four colours – Tan Brown, Cream Beige, Burgundy (Limited Edition) and Black.

Features

  • Self-adhesive and easy to install
  • Hides the nasty plastic finish of the interior flooring
  • Completely transforms and enhances the interior of your model
  • Realistic look and feel
  • Professionally and accurately cut

What’s included:

  • 1 x Set of self-adhesive carpets (11 pieces in total)
  • 1 x Spudger tool
  • 1 x Installation diagram
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

Video reviews

Reviews (2)

Add a review
  1. Rated 5 out of 5

    Leo Schröder (verified owner)

    Perfect fit. All was done in less than 45 minutes. Ordered and in house in a few days

  2. Rated 5 out of 5

    Peter (verified owner)

    These parts are amazing!! Fit like a glove from the front where the pedals are, to the back. The 11 pieces are easy to put on and gives the car a whole new look. It looks great!
    Mike did an awesome job designing and producing these carpets. Thank you, Mike.