1:8 Mini Cable Ties
£16.00 ex VAT
Suitable for all 1:8 scale model projects
These tiny zip ties have been designed to simulate the real thing. Installing them is easy – just peel and tie your micro zip ties in place!
These mini cable ties were originally designed as a mod for the 1:8 DeLorean Time Machine model by Eaglemoss. But they are equally suitable for modding any other 1:8 replica model that would benefit from adding tiny zip ties, such as the Ghostbusters Ecto-1 by Hero Collector!
They are available in three colours: black, white and clear.
- 1 x Pack of 40 mini cable ties in two lengths (30 long and 10 regular).
To fit these mini cable ties you will need:
- A good set of fine point tweezers
- Good eyesight, patience, and a steady hand 😄
Positioning your Mini Cable Ties:
1) “Where do the cable ties go in the DeLorean Time Machine?”
Here’s a collection of photos showing the exact location of all the cable ties (both black and white): http://bit.ly/cable-ties
Thank you to Todd at http://mybttfdelorean.com who was kind enough to snap and share these photos of the original DeLorean ‘A’ car itself on display at the Petersen Museum in Los Angeles, California.
2) “How many sets do I need?”
This all depends on how detailed you want to go. Some builders are quite happy to replace the supplied over-sized ones for mine, in which case a single pack of white and a single pack of black will do the trick. However, for the rivet counters of you out there (myself included) who wish to detail their DeLorean true to the original, I would recommend a minimum of two white packs and one black pack. Each pack comes with 40 mini cable ties, and of course, if you need more you can always come back!