Metal Keys and Key Tag

£25.00 ex VAT

MADE TO ORDERUSUALLY DISPATCHED WITHIN 7-14 DAYS

  Designed for Issue 47 of the Build the DeLorean Time Machine by Eaglemoss/DeAgostini. View build planner

Designed to either hang out of the door or from the ignition, these 1:8 scale metal keys are the perfect addition to your DeLorean model. They can also be inserted just like a real key!

They really are as close as you can get to the real thing, accurately modelled and scaled on the exact keys used in the original Hero ‘A’ car.

Supplied within a protective metal frame, the keys that come with this DeLorean mod can be easily released from their supports using a small craft knife. Fully illustrated instructions are provided to guide you through the process of releasing the keys and installing them in your car.

What’s included:

  • 1 x Blue key tab with insert
  • 2 x Key rings, 1 pre-attached to the blue key tab and 1 spare (can be used for the bonus stock DMC key if desired)
  • 1 x Metal key frame housing all keys supplied on a protective backing card (breakdown of keys detailed below):
    • 3 x General metal keys which shared the same key ring as the ignition key
    • 1 x DeLorean Time Machine ignition key
    • 2 x Half-length DeLorean Time Machine ignition keys
    • 4 x Key holes (1 for the ignition, 1 for each door, and 1 spare)
    • 1 x Stock DMC ignition key
    • 2 x Half-length stock DMC ignition keys
  • 1 x Illustrated set of instructions

The Ignition Key

The ignition key used for the DeLorean Time Machine was actually a Volvo key, not a stock DMC key as you would expect. I have also included the stock DMC key in case you would like to use or display it separately, but it wasn’t used in the Back to the Future movie.

There are two options for installing the ignition key mod into your model. It is provided in two lengths: full length and half length.

The full length key can be installed directly into the model by making a small hole or slot, or if you prefer you can use the half length keys which can be glued to the car instead.

The Bent Key

Included within the original set of keys was a vintage ignition key (not for the DeLorean itself) which featured a bend. This has been catered for even at this tiny scale with two score lines allowing you to replicate this bend. If you look closely you’ll be able to see this demonstrated in the photos opposite.

The Key Tag

Handmade and pre-attached to the keyring for convenience, the key tag mod has also been faithfully matched to the original seen in the movie. Double-sided, it includes Doc Brown’s contact details, address and licence number, which on his key tag actually reads OUT-A-TIME.

Bonus Stock Keys

As mentioned earlier, I have included these bonus stock keys in homage to the original DeLorean DMC-12. Whilst they didn’t feature in the movie, they would be particularly useful if you are building a stripped back 1:8 DeLorean DMC-12. If you plan on using these you will need to paint the heads black to match the plastic heads of the originals.

Gluing Tip: Loctite Super Glue will give the quickest and strongest fixing, but there is a risk of damaging your model with ‘fogging’ if you use too much. Use a pin-prick amount, or if possible, to avoid any fogging use solvent-free glues instead, such as Unibond 100% Power Glue or an Epoxy glue such as Gorilla Epoxy.
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.
  Designed for Issue 47 of the Build the DeLorean Time Machine by Eaglemoss/DeAgostini. View build planner

Designed to either hang out of the door or from the ignition, these 1:8 scale metal keys are the perfect addition to your DeLorean model. They can also be inserted just like a real key!

They really are as close as you can get to the real thing, accurately modelled and scaled on the exact keys used in the original Hero ‘A’ car.

Supplied within a protective metal frame, the keys that come with this DeLorean mod can be easily released from their supports using a small craft knife. Fully illustrated instructions are provided to guide you through the process of releasing the keys and installing them in your car.

What’s included:

  • 1 x Blue key tab with insert
  • 2 x Key rings, 1 pre-attached to the blue key tab and 1 spare (can be used for the bonus stock DMC key if desired)
  • 1 x Metal key frame housing all keys supplied on a protective backing card (breakdown of keys detailed below):
    • 3 x General metal keys which shared the same key ring as the ignition key
    • 1 x DeLorean Time Machine ignition key
    • 2 x Half-length DeLorean Time Machine ignition keys
    • 4 x Key holes (1 for the ignition, 1 for each door, and 1 spare)
    • 1 x Stock DMC ignition key
    • 2 x Half-length stock DMC ignition keys
  • 1 x Illustrated set of instructions

The Ignition Key

The ignition key used for the DeLorean Time Machine was actually a Volvo key, not a stock DMC key as you would expect. I have also included the stock DMC key in case you would like to use or display it separately, but it wasn’t used in the Back to the Future movie.

There are two options for installing the ignition key mod into your model. It is provided in two lengths: full length and half length.

The full length key can be installed directly into the model by making a small hole or slot, or if you prefer you can use the half length keys which can be glued to the car instead.

The Bent Key

Included within the original set of keys was a vintage ignition key (not for the DeLorean itself) which featured a bend. This has been catered for even at this tiny scale with two score lines allowing you to replicate this bend. If you look closely you’ll be able to see this demonstrated in the photos opposite.

The Key Tag

Handmade and pre-attached to the keyring for convenience, the key tag mod has also been faithfully matched to the original seen in the movie. Double-sided, it includes Doc Brown’s contact details, address and licence number, which on his key tag actually reads OUT-A-TIME.

Bonus Stock Keys

As mentioned earlier, I have included these bonus stock keys in homage to the original DeLorean DMC-12. Whilst they didn’t feature in the movie, they would be particularly useful if you are building a stripped back 1:8 DeLorean DMC-12. If you plan on using these you will need to paint the heads black to match the plastic heads of the originals.

Gluing Tip: Loctite Super Glue will give the quickest and strongest fixing, but there is a risk of damaging your model with ‘fogging’ if you use too much. Use a pin-prick amount, or if possible, to avoid any fogging use solvent-free glues instead, such as Unibond 100% Power Glue or an Epoxy glue such as Gorilla Epoxy.
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

Video reviews

Reviews (13)

Add a review
  1. Rated 5 out of 5

    Patric S. (verified owner)

    Sehr klein und sehr gut verarbeitet. Top Qualität!

  2. Rated 5 out of 5

    Jon Blind (verified owner)

    An amazing, very accurate mod for my Delorean! It's all in the small details that I'm able to do thanks to Mike and his mods that's making my Delorean museum quality! Thanks for putting these together Mike!

  3. Rated 5 out of 5

    Arturo Cañedo Arenas (verified owner)

    Que tal Mike,
    Estoy muy agradecido y asombrado por tu trabajo.
    Es REALMENTE UNA OBRA DE ARTE. TOTALMENTE SATISFECHO. Felicidades y cuando vengas a México búscame para tomarnos unos Tequilas en honor a tu trabajo...
    Arturo Cañedo

  4. Rated 5 out of 5

    Enzo Nardozza (verified owner)

    👍🏻👍🏻👍🏻👍🏻👍🏻 Sono fantastici. Sembrano vere!!!!👍🏻👍🏻👍🏻👍🏻☺️☺️

  5. Rated 5 out of 5

    Barry Lowe (verified owner)

    If it wasn’t for these keys Marty wouldn’t have been going anywhere! Add them for that extra fine detail and beautiful craftsmanship

  6. Rated 5 out of 5

    Ross Tayler (verified owner)

    Add such realism to the build. Mike Lane you are an inspiration and a genius.

  7. Rated 5 out of 5

    Philippe Foubert (verified owner)

    Awesome, I will be able to open the doors and start the engine ;-)

  8. Rated 5 out of 5

    tenumaster (verified owner)

    WOW, JUST WOW,
    The level of detail of this is just AWESOME! the keys generates another level of detail in the DeLorean! Me and my family love this!
    Big detail: I saw the movie a couple of times more and i realize that the doors also have metal frame so i put it in all the places!

  9. Rated 5 out of 5

    Francesco (verified owner)

    Riproduzione perfetta. Grazie Mike per tutte le mods (le acqusterei tutte) e grazie anche per gli orsetti gommosi!!!

  10. Rated 5 out of 5

    François Lauwereys (verified owner)

    Bonjour Mike j'ai bien reçu mon colis des clefs, merci pour ce beaux travail .