Heel and Toe Pads

£18.00 ex VAT

MADE TO ORDERHANDMADE AND TYPICALLY SHIPPED WITHIN 1-2 WEEKS

  Designed for Issue 52 of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya.

Installation instructions

Please refer to the photos here on this page for additional installation guidance.

  1. The heel pads have been pre-bent into shape – however, before removing the adhesive backing, please check that you are happy with the fit. The heel pads are made from metal and are easily pliable if you need to adjust for a better fit.
  2. Once you’re happy with the fit, remove the protective backing from the 3M adhesive.
  3. Check the photos here on this page for the correct orientation and placement of the heel pads.
  4. Remove the protective backing from the 3M self-adhesive and stick into position – the adhesive will strengthen over time to ensure a long-lasting hold.

Self-adhesive and easy to install, these heel and toe pads for the driver side footwell have been faithfully matched in every detail to those found in the real Knight Rider K2000.

Handmade and pre-painted, each heel and toe pad is highly detailed, including moulded sections and stitching. With a genuine 3M self-adhesive backing, the heel and toe pads are also quick and easy to install.

Designed to complement my front carpet set for KITT, available here, this heel and toe pad mod really helps to lift the interior detailing and the overall quality and accuracy of the model.

What’s included:

  • 1 x Heel pad
  • 1 x Toe pad
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

  Designed for Issue 52 of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya.

Installation instructions

Please refer to the photos here on this page for additional installation guidance.

  1. The heel pads have been pre-bent into shape – however, before removing the adhesive backing, please check that you are happy with the fit. The heel pads are made from metal and are easily pliable if you need to adjust for a better fit.
  2. Once you’re happy with the fit, remove the protective backing from the 3M adhesive.
  3. Check the photos here on this page for the correct orientation and placement of the heel pads.
  4. Remove the protective backing from the 3M self-adhesive and stick into position – the adhesive will strengthen over time to ensure a long-lasting hold.

Self-adhesive and easy to install, these heel and toe pads for the driver side footwell have been faithfully matched in every detail to those found in the real Knight Rider K2000.

Handmade and pre-painted, each heel and toe pad is highly detailed, including moulded sections and stitching. With a genuine 3M self-adhesive backing, the heel and toe pads are also quick and easy to install.

Designed to complement my front carpet set for KITT, available here, this heel and toe pad mod really helps to lift the interior detailing and the overall quality and accuracy of the model.

What’s included:

  • 1 x Heel pad
  • 1 x Toe pad
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

Reviews

Be the first to review “Heel and Toe Pads”

Your email address will not be published.

There are no reviews yet.