Front Carpets

£26.00£28.00 ex VAT

Clear

What others have to say about this:

  Designed for Issues 49 and 52 of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya. View Build Planner

Installation instructions

Please refer to the step-by-step photos here on this page for additional installation guidance.

  1. Ensure that all sections requiring carpet (parts 49A, 49B, 52A and 52C) are disassembled and completely removed from the model before you start.
  2. For best results, install the carpet sections in the order specified on the installation diagram provided, also indicated in the step-by-step photos here on this page.
  3. Ensure that part 52C is installed last, after fitting the carpets to the main floor section (52A).
  4. Each piece is self-adhesive – simply peel off the backing and begin sticking into place.
  5. Lay each piece slowly to check for alignment – using your fingers to apply and push out any potentially trapped air bubbles from beneath the carpet as you go.
  6. The provided spudger tool is handy for pressing the carpets into difficult to reach areas and corners, but be mindful not to drag the tool along the main carpet surfaces as you risk damaging or tearing it. Only use your fingers for pressing the carpets into their final position.
  7. The adhesive will strengthen within just a few hours of contact, so if you need to peel and reposition the carpets, ensure you act quickly during installation.

Self-adhesive and easy to install, these premium high-quality scale carpets will boost the interior of your 1:8 scale KITT to the next level.

Pre-cut and crafted to fit your model perfectly, this comprehensive 17-piece carpet set has been meticulously designed to enhance the interior of your build-up model – helping to make it look even more authentic to the original KITT.

Made from a unique, custom material, the carpets are easy to install and accurate in colour, with a realistic look and feel to them. Once installed, this modification will give your model a much higher-quality, premium finish.

The Tan Brown colour is the closest match to KITT’s interior and has been specially created for this model. The installation photos show Tan Brown carpets installed. 

  Detailing tip:

The armrest from Issue 51 – I recommend painting the armrest (part 51D) black to accurately match how it looked in KITT. The cream armrest was an unfortunate inaccuracy carried over from a replica KITT used for the production of this model. To repaint this, I would recommend a coat of Tamiya Fine Surface Primer, followed by two coats of Tamiya TS-6 Matt Black and an optional final coat of clear matt lacquer to protect the paint.

Features

  • Self-adhesive and easy to install
  • Hides the nasty plastic finish of the interior flooring
  • Completely transforms and enhances the interior of your model
  • Realistic look and premium feel
  • Professionally and precisely cut

What’s included:

  • 1 x Set of self-adhesive carpets for the front section of KITT (17 pieces in total)
  • 1 x Spudger tool
  • 1 x Installation diagram
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

SKU: DAKFC Category: Brand:
  Designed for Issues 49 and 52 of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya. View Build Planner

Installation instructions

Please refer to the step-by-step photos here on this page for additional installation guidance.

  1. Ensure that all sections requiring carpet (parts 49A, 49B, 52A and 52C) are disassembled and completely removed from the model before you start.
  2. For best results, install the carpet sections in the order specified on the installation diagram provided, also indicated in the step-by-step photos here on this page.
  3. Ensure that part 52C is installed last, after fitting the carpets to the main floor section (52A).
  4. Each piece is self-adhesive – simply peel off the backing and begin sticking into place.
  5. Lay each piece slowly to check for alignment – using your fingers to apply and push out any potentially trapped air bubbles from beneath the carpet as you go.
  6. The provided spudger tool is handy for pressing the carpets into difficult to reach areas and corners, but be mindful not to drag the tool along the main carpet surfaces as you risk damaging or tearing it. Only use your fingers for pressing the carpets into their final position.
  7. The adhesive will strengthen within just a few hours of contact, so if you need to peel and reposition the carpets, ensure you act quickly during installation.

Self-adhesive and easy to install, these premium high-quality scale carpets will boost the interior of your 1:8 scale KITT to the next level.

Pre-cut and crafted to fit your model perfectly, this comprehensive 17-piece carpet set has been meticulously designed to enhance the interior of your build-up model – helping to make it look even more authentic to the original KITT.

Made from a unique, custom material, the carpets are easy to install and accurate in colour, with a realistic look and feel to them. Once installed, this modification will give your model a much higher-quality, premium finish.

The Tan Brown colour is the closest match to KITT’s interior and has been specially created for this model. The installation photos show Tan Brown carpets installed. 

  Detailing tip:

The armrest from Issue 51 – I recommend painting the armrest (part 51D) black to accurately match how it looked in KITT. The cream armrest was an unfortunate inaccuracy carried over from a replica KITT used for the production of this model. To repaint this, I would recommend a coat of Tamiya Fine Surface Primer, followed by two coats of Tamiya TS-6 Matt Black and an optional final coat of clear matt lacquer to protect the paint.

Features

  • Self-adhesive and easy to install
  • Hides the nasty plastic finish of the interior flooring
  • Completely transforms and enhances the interior of your model
  • Realistic look and premium feel
  • Professionally and precisely cut

What’s included:

  • 1 x Set of self-adhesive carpets for the front section of KITT (17 pieces in total)
  • 1 x Spudger tool
  • 1 x Installation diagram
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.

 

SKU: DAKFC Category: Brand:

Video reviews

Reviews (16)

Add a review
  1. Rated 5 out of 5

    Raphael (verified owner)

    Completely Transforms the Interior of the Model, Giving a Clean and Screen Accurate Look.
    A Must Have Mod!

  2. Rated 5 out of 5

    kissworldorder (verified owner)

    High quality professionally made. Definitely recommend.

  3. Rated 5 out of 5

    Jamie Park (verified owner)

    Installed my front carpets today,i wasnt that eager to do this tbh,as i am not too good with stickers,but mike made it so easy,excellent work 👍

  4. Rated 5 out of 5

    Jamie Park (verified owner)

    Fitted mine today,after getting my floor panel.must admit wasnt looking forward to this,as i am not too good with stickers,but mike made it so easy with his brilliant mods.excellent work 😁

  5. Rated 5 out of 5

    Domenico (verified owner)

    Perfetti , realizzati in maniera maniacale , si adattano perfettamente , ottimo lavoro Mike , grazie mille.

  6. Rated 5 out of 5

    paolo.pagliuso (verified owner)

    Arrivati oggi sono fatti molto bene, facile da montare è tutta un altra cosa con la moquette di supercar, grazie mille Mike.

  7. Rated 5 out of 5

    山本 領一 (verified owner)

    質感が上がりました、素晴らしいの一言です!

  8. Rated 5 out of 5

    匿名 (verified owner)

    とても素晴らしかったです。格段にクオリティーが上がりました。今後も期待しています!

  9. Rated 5 out of 5

    John spanovich

    This is the coolest large scale model of kitt ever made.

  10. Rated 5 out of 5

    Dino (verified owner)

    One word, great. The final result is truly incredible