Designed for Issue 83 of the Build the DeLorean Time Machine by Eaglemoss. View build planner
An advanced alternative to my Green Tube stickers included in Decal Set 3. The design is the same, however they differ in that these transfers apply self-adhesive inks directly to the surface. This technique gives a much more authentic, higher definition look compared to stickers.
Tip: For maximum accuracy it is recommended to apply this transfer upside down on the top green tube as shown in my photos. The original Hero ‘A’ Car had the print printed upside down also.
The transfers are delicate, so care and attention is required when handling. Only one transfer is required but due to their size and potential risk of losing one or making mistakes I have included spares.
To apply, hold securely in place with tape and carefully and thoroughly rub over the transfer with a pencil. All explained in the instructions provided.
What’s included:
1 x Set of green tube transfers (3 transfers are included per set to allow for potential slip-ups)
1 x Set of instructions
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes only.
Designed for Issue 83 of the Build the DeLorean Time Machine by Eaglemoss. View build planner
An advanced alternative to my Green Tube stickers included in Decal Set 3. The design is the same, however they differ in that these transfers apply self-adhesive inks directly to the surface. This technique gives a much more authentic, higher definition look compared to stickers.
Tip: For maximum accuracy it is recommended to apply this transfer upside down on the top green tube as shown in my photos. The original Hero ‘A’ Car had the print printed upside down also.
The transfers are delicate, so care and attention is required when handling. Only one transfer is required but due to their size and potential risk of losing one or making mistakes I have included spares.
To apply, hold securely in place with tape and carefully and thoroughly rub over the transfer with a pencil. All explained in the instructions provided.
What’s included:
1 x Set of green tube transfers (3 transfers are included per set to allow for potential slip-ups)
1 x Set of instructions
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes only.
Brian MacNutt (verified owner) –
These transfers look the part, and will go far to get my "Green Tubes" in shape! Thanks, Mike, and well done!