Designed for Issue 66of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya. View Build Planner
Installation instructions
Please refer to the step-by-step photos here on this page for additional installation guidance.
Ensure that all sections requiring carpet (part 66A) are disassembled and completely removed from the model before you start.
For best results, install the carpet sections in the order specified on the installation diagram provided, also indicated in the step-by-step photos here on this page.
Each piece is self-adhesive – simply peel off the backing and begin sticking into place.
Lay each piece slowly to check for alignment – using your fingers to apply and push out any potentially trapped air bubbles from beneath the carpet as you go.
The provided spudger tool is handy for pressing the carpets into difficult to reach areas and corners, but be mindful not to drag the tool along the main carpet surfaces as you risk damaging or tearing it. Only use your fingers for pressing the carpets into their final position.
The adhesive will strengthen within just a few hours of contact, so if you need to peel and reposition the carpets, ensure you act quickly during installation.
Self-adhesive and easy to install, this set for the trunk area continues the carpeting upgrade for KITT’s interior.
Expertly crafted and precisely cut to fit your model exactly, these carpets are designed to be used alongside my Front Carpets for KITT, available here.
Made from a bespoke material, the carpets have a realistic look and feel to them and have been designed to install in seconds, hugely enhancing KITT’s interior.
Features
Self-adhesive and easy to install
Hides the nasty plastic finish of the interior flooring
Completely transforms and enhances the interior of your model
Realistic look and feel
Professionally and accurately cut
What’s included:
1 x Set of self-adhesive carpets for the trunk section of KITT (4 pieces in total)
1 x Spudger tool
1 x Installation diagram
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.
Designed for Issue 66of the Build the K2000 KITT Knight Rider by DeAgostini/Fanhome/Altaya. View Build Planner
Installation instructions
Please refer to the step-by-step photos here on this page for additional installation guidance.
Ensure that all sections requiring carpet (part 66A) are disassembled and completely removed from the model before you start.
For best results, install the carpet sections in the order specified on the installation diagram provided, also indicated in the step-by-step photos here on this page.
Each piece is self-adhesive – simply peel off the backing and begin sticking into place.
Lay each piece slowly to check for alignment – using your fingers to apply and push out any potentially trapped air bubbles from beneath the carpet as you go.
The provided spudger tool is handy for pressing the carpets into difficult to reach areas and corners, but be mindful not to drag the tool along the main carpet surfaces as you risk damaging or tearing it. Only use your fingers for pressing the carpets into their final position.
The adhesive will strengthen within just a few hours of contact, so if you need to peel and reposition the carpets, ensure you act quickly during installation.
Self-adhesive and easy to install, this set for the trunk area continues the carpeting upgrade for KITT’s interior.
Expertly crafted and precisely cut to fit your model exactly, these carpets are designed to be used alongside my Front Carpets for KITT, available here.
Made from a bespoke material, the carpets have a realistic look and feel to them and have been designed to install in seconds, hugely enhancing KITT’s interior.
Features
Self-adhesive and easy to install
Hides the nasty plastic finish of the interior flooring
Completely transforms and enhances the interior of your model
Realistic look and feel
Professionally and accurately cut
What’s included:
1 x Set of self-adhesive carpets for the trunk section of KITT (4 pieces in total)
1 x Spudger tool
1 x Installation diagram
All other model parts and accessories shown in the photos outside of the ‘What’s included’ list above are not included and are shown purely for demonstration and application purposes.
manfred.baumgartner93 (verified owner) –
sehr gut wie immer
schtofleur93 (verified owner) –
Vraiment excellent facile à posé
Brian Dubin (verified owner) –
Just like the interior carpets, the trunk carpets really take the model to another level. They were easy to install as well. Another great mod!